تسجيل الدخول
تسجيل جديد
الخميس - صفر 27, 1447
مسجل لدى هيئة الحكومة الرقمية برقم:
20250728714
عن تيقظ
بحث عن منتج
تقديم بلاغ
أسئلة شائعة
تواصل معنا
EN
SA-22-07-25-969
التفاصيل
الرقم المرجعي
الشركة الصانعة
اسم الجهاز الطبي
- Digital Radiography System RADspeed safire - RADspeed Pro - CEILING TUBE SUPPORT CH-200 - CEILING TUBE SUPPORT CH-200M
الأجهزة المتأثرة
- Digital Radiography System RADspeed safire - RADspeed Pro - CEILING TUBE SUPPORT CH-200 - CEILING TUBE SUPPORT CH-200M
الممثل المعتمد
Medical Supplies and Services Co Ltd
سبب المشكلة
In the above equipment, it was found that the shaft for mounting the X-ray tube unit on the support may break. In addition, it was found that the protective parts might not work effectively only when the shaft was broken while being operated toward the front while lifting.
الإجراء التصحيحي
Perform the daily inspection described in the CH-200/CH-200M operation manual to check for wobbles or shakes, misalignment of the light irradiation position, etc. If any abnormality is found, discontinue use and contact our service provider. When rotating the X-ray tube unit, do not hit the stopper at the end. If the stopper is hit hard, in the unlikely event that a crack has already occurred, a large impact may be applied and the growth of the crack may be accelerated. In the case of electric rotation, it is controlled by software and does not hit the stopper. Do not rotate the X-ray tube over or near the patient. Shimadzu will be taken additional measures to ensure that the Support Section is maintained in all circumstances. Manufacturer action: Instructions and correction.
المرفقات
عودة للقائمة
